In this guide, we explain how to clean a pool cartridge filter. This step by step guide will ensure that a routine chore of cleaning the filter is done correctly. Note: We used a Hayward SwimClear cartridge filter in this guide. However, the general steps can be applied to any cartridge filter.
Step 1
Turn the pool pump off.
Step 2
Open the air relief. This will release the pressure and drain most of the water from the filter.
Step 3
Remove the lid from the tank. This is usually done by loosening a lock ring, clamp, or knob.
Step 4
Remove the cartridge from the filter canister and set it somewhere it can be hosed off.
Step 5
Using the high-pressure setting on a garden hose nozzle, spray off the cartridge from the top down. Do this until the cartridge is free of debris.
Step 6
Put the cartridge back in the filter canister.
Step 7
Place the lid back on the filter and tighten it down.
Step 8
Turn the pump back on. It may need to be primed if it struggles to get started.
"How to Prime a Pool Pump"
Step 9
Keep the air relief valve open until water starts to spray out. Then close the air relief valve.
The cartridge cleaning process is complete.
Comments
0 comments
Please sign in to leave a comment.