Nathan H

This guide discusses the function of a pool check valve and when and where to install it in your pool's circulation system. Click Here to View Our Full Selection Check Valves Step 1 PURPOSE OF A C...

Diverter Valves are installed in a pool piping system to control or divert the flow of water from one part of the system to another. There are several types of Diverter Valves. This guide discusses...

There are several types of pool Check Valves. This guide provides an overview of the function, description, and repair or replacement of these Check Valves. Click Here to View Our Full Selection of...

The Hayward Filter Control Slide Piston Assembly, has four O-rings, three on the outside of the Assembly and 1 inside the assembly. To access this internal O-ring for maintenance or repair, you wil...

If through long use or abuse, your Hayward Slide Valve Handle and Piston Assembly is no longer useable but the Body Assembly is still functional, you may elect to replace the Assembly. This guide s...

There are three O-rings in a typical Diverter Valve: the valve cover O-ring and two Shaft O-rings. With time these O-rings become brittle and crack. Damaged O-rings on the suction side of the pump ...

The O-Rings in a simple Ball Valve cannot be accessed so there is no way to replace them. When the valve starts to leak, the whole Valve has to be replaced. If you want to access the O-Rings, you m...

A swimming pool actuator is an automated valve that is either connected to a swimming pool automation system or a solar heater system. These occasionally stop working and need to be replaced. There...

Follow these steps for spider gasket replacement for pool filter multiport backwash valves. PLEASE NOTE THAT THE VALVE USED IN THIS GUIDE IS FOR ILLUSTRATIVE PURPOSES ONLY. THE DIFFUSER ON THIS VAL...

This picture shows a typical Spring Check Valve. If you have a pool Spring Check Valve installed in your pool circulation system and you notice water running backwards in your pool after you turn o...