How To Replace the Pentair Kreepy Krauly Sand Shark Seal Flaps

Things You’ll Need

• Pentair Kreepy Krauly Sand Shark Seal Flaps

Step 1

ORDER PARTS - The first step is to order the parts you will need. The only part required is a set of Pentair Kreepy Krauly Sand Shark SEAL FLAPS.

Step 2

REMOVE SEAL FLAPS - Turn your Pentair Kreepy Krauly Sand Shark Cleaner over on its back to access the Seal Flaps. GENTLY pull the Seal Flaps out of their grooves.

Step 3

REPLACE SEAL FLAPS - Press the new Seal Flaps into their respective grooves. Note: There are two grooves to install each Flap into, a large one and a small one. Line up each Flap to fit into both grooves correctly. Press down hard to make sure the flap is install all the way into the grooves.

Step 4

CLEANER IS READY - That's all there is to replacing the old Seal Flaps. Your Cleaner is ready to go.