How to replace a Hayward Tiger Shark Handle

Things You’ll Need

• Hayward TigerShark Cleaner Handle
• Hayward TigerShark Cleaner Handle Screw
• Hayward TigerShark Cleaner Handle Latch
• Hayward TigerShark Cleaner Handle Arm Slide

Step 1

First, with your Hayward Tiger Shark pool cleaner sitting on its rollers find the pivot screws on the end of each arm on the Tiger Shark Handle; remove these screws and discard old or broken handle. Replacement Tiger Shark Pool Cleaner Handle part #: 3276-078

Step 2

Inspect the Handle Arm Slide and Handle Latch for any defects before installing new handle. Replacement Tiger Shark Handle Arm Slide part #: 3276-044, Handle Latch part #: 3276-045

Step 3

Install the new handle by securing the arms of the handle to the arm slide as pictured.

Step 4

Once tightly fastened slide the handle latch from left to right on both sides to check if there is any hitch on it its action, if so you may have dislodged the latch slide from its track. Depress the latch button and pop the slide back into place.